Acer G41m07 Motherboard Manual |best| -
The Last Manual: A Story About an Acer G41M07 Motherboard Manual
- Chipset: Intel G41 + ICH7
- CPU socket: LGA 775 (supports Core 2 Quad, Core 2 Duo, Pentium Dual-Core, Celeron — 65W TDP limit on some versions)
- RAM: 2 × DDR3 DIMM slots, max 4GB (8GB on newer BIOS versions), 1066/1333 MHz (unofficial 1600 support)
- Expansion slots: 1 × PCIe x16, 1 × PCIe x1, 2 × PCI
- Storage: 4 × SATA II (3 Gb/s), 1 × IDE (optional on some revisions)
- Rear I/O: PS/2 keyboard+mouse, VGA, COM (some), 4× USB 2.0, LAN, audio jacks
- Power connectors: 24-pin ATX + 4-pin CPU
Proprietary Front Panel:
Like many Acer OEM boards, the front panel header (power button, LEDs) may follow a non-standard pinout, requiring manual testing if moved to a non-Acer case.
The front panel header is typically located at the bottom-right of the motherboard. If the pins are not labeled on the board, use this common Acer/Foxconn layout: Acer Community Typical Colors (Pin 1 is +) (Pin 2 is +) Green/White Reset Switch Power Switch Key (Empty) (Side orientation) Green/Orange acer g41m07 motherboard manual
10. Downloads & Resources
Because this is an Acer proprietary board, the front panel header pinout is not standard. If you are moving this board into a new case, use this pinout diagram (looking at the board with the PCI slots facing down): The Last Manual: A Story About an Acer
Socket:
LGA 775 (Supports Intel Core 2 Quad, Core 2 Duo, Pentium Dual-Core, and Celeron processors). Chipset : Intel G41 + ICH7 CPU socket
| Pin | Signal | Pin | Signal | |-----|--------|-----|--------| | 1 | HD_LED+ | 2 | PWR_LED+ | | 3 | HD_LED- | 4 | PWR_LED- | | 5 | GND | 6 | PWR_BTN# | | 7 | RESET_BTN# | 8 | GND | | 9 | NC | 10 | NC |
- Power Switch: Pins 6 and 8 (often labeled PWR_SW).
- Reset Switch: Pins 5 and 7 (RST_SW).
- Power LED: Pins 2 and 4 (Positive and Negative).
- Hard Drive LED: Pins 1 and 3 (Positive and Negative).
