Avery Berkel L126 Calibration | Exclusive

Avery Berkel L126

The is a waterproof, stainless steel digital indicator often used in basic weighing for food, chemical, and pharmaceutical industries. To calibrate this device, you typically need to access its internal service mode using a physical switch or specific key combinations. Calibration Procedure

  1. Enter calibration mode as above.
  2. Look for "FAC" or "dEF" (default).
  3. Press Enter and confirm with 1 or Yes.
  4. Note: This erases PLU data and resets all settings. Re-calibrate immediately after.

The display should now show LOAD 10 (or the equivalent weight for your setup). avery berkel l126 calibration

  • Display Confirmation: The display should change from the weight view to a setup code screen (often displaying CAL, SET, or a code like F1).

    • The following sequence is commonly used to manually calibrate Avery Berkel indicators in this series: Avery Berkel L126 The is a waterproof, stainless

    • Meaning: The calibration memory is corrupted.
    • Fix: You must perform a "Factory Reset" before calibrating. In service mode, look for an option labeled "EE Init" or "Default." Note: This will erase all PLU data and label formats.

    This document reviews the calibration procedure, requirements, common issues, and recommendations for the Avery Berkel L126 scale (model L126). It is intended for technicians, quality managers, and procurement teams responsible for weighing accuracy and traceability. Enter calibration mode as above

    For more specific configurations or if the "DIAG" menu does not appear, you can consult the official documentation on the Avery Berkel Support Page.

    Select Units

    : Use the red Zero button to scroll through units until your preferred measure (e.g., "ounce" or "kg") appears. Confirm by pressing the blue Test button .

    Scroll to Top