Biosystems Bts 350 User Manual !exclusive! May 2026

Unlocking the Power of Biosystems BTS 350: A Comprehensive User Manual Guide

Thermal Equilibrium:

Allow the unit 10–15 minutes to reach the programmed temperature (usually 37°C for most enzymes). 3. Programming and Running Assays

1. Warm-up: Turn on the unit and allow 15 minutes for the lamp to stabilize and the incubator block to reach 37°C ± 0.2°C.
2. Set parameters: For a test like ALT (GPT), you must input the reaction factor, sample volume (e.g., 10 µL), reagent volume (e.g., 1000 µL), and the reading time (e.g., 60 seconds).
3. Blank the system: Aspirate distilled water through the cuvette. The manual insists that the water path must be bubble-free.
4. Aspirate the reaction mixture: The user manually mixes the patient serum with reagent in a separate cuvette, then uses the peristaltic pump probe to aspirate it into the flow cell.
5. Read the result: The instrument calculates the absorbance change and prints or displays the concentration.

Quick Support

: Check the BioSystems Global site for general maintenance guides and videos. ⚙️ Core Technical Specifications BTS User Manual | PDF | Absorbance | Calibration - Scribd biosystems bts 350 user manual

Biosystems BTS 350

Here’s a useful, concise addendum or quick-reference insert related to the user manual. This piece addresses a common gap in many lab manuals: daily troubleshooting & maintenance log combined with a sample-to-result checklist . Unlocking the Power of Biosystems BTS 350: A