Cobra 3195 Alarm Manual Full !exclusive! May 2026
1. Quick‑Start Summary
- Operating voltage: 12V DC
- Current draw: 20mA
- Siren output: 120dB
- Strobe light output: 2W
- Enter programming mode (Section 3.1), then press lock button on remote. Each press toggles between short (1 chirp) and long (2 chirps) pulse.
10 seconds
Press and hold buttons on the new fob for until the system confirms with a flash or beep.
Customer‑support hotline
- Enter the user's code on the keypad.
- Press the "ARM" button to arm the system.
If you encounter any issues with your Cobra 3195 alarm system, refer to the troubleshooting section in the manual. Here are some common problems and solutions: cobra 3195 alarm manual full
: Press the "Unlock" button on your vehicle's original remote. The hazard lights will flash twice, and the LED will stop flashing. Passive Arming Operating voltage: 12V DC Current draw: 20mA Siren
The security LED will blink once to signal it is ready for the PIN. Enter the 1st digit: Turn the ignition Enter programming mode (Section 3