Din En 60352-2 Pdf -
DIN EN 60352-2 standard (equivalent to IEC 60352-2 ) provides the essential requirements, test methods, and practical guidance for solderless crimped connections
- Visual inspection standards and definition of unacceptable defects (e.g., insufficient wetting, solder bridges).
- Shear testing of component leads or terminations: fixture design, applied force direction, and pass/fail thresholds.
- Pull (tensile) testing of mounted components or wires: single-lug pull tests with specified pull speed and required minimum force.
- Peel tests, particularly for surface-mounted component terminations and wire-to-board joints.
- Thermal cycling: number of cycles, dwell times, and temperature extremes to simulate aging and thermal stress.
- Humidity/damp heat exposure followed by electrical and mechanical checks.
- Solderability tests: preconditioning of leads and pads and subsequent solderability evaluation to ensure proper wetting when soldered.
2. Electrical Requirements (Voltage Drop)
The standard applies to solderless crimped connections made with: Stranded conductors Solid conductors in diameter. Exclusions : It specifically does apply to the crimping of coaxial cables. iTeh Standards 2. General Requirements din en 60352-2 pdf
DIN EN 60352-2: Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance Equivalent Standards IEC 60352-2, BS EN 60352-2 DIN EN 60352-2 standard (equivalent to IEC 60352-2
What the standard covers
How to Legally Obtain the DIN EN 60352-2 PDF
Primary Application
: Covers solderless crimped connections made with stranded or solid wires. Essential Tests : applied force direction
4. Missing the "Practical Guidance" Annex