Led Mirror Clock Instructions Portable - Dt-6507
DT-6507 LED Mirror Clock: Setup & Operating Instructions
To switch between Celsius and Fahrenheit:
- Press “M” twice (or hold “M” then press again) until AL appears.
- Use “+” / “–” to set hour → press M → set minutes → press M.
- To enable/disable alarm, press “+” or “–” when “AL on/off” flashes.
- Alarm icon 🔔 will show on display when active.
| Problem | Likely Cause | Fix | |---------|--------------|-----| | Display is too dim | Brightness set low | Tap ▲ repeatedly | | Time resets every day | No battery backup | Cannot be fixed; keep plugged in | | Alarm doesn’t sound | Alarm is OFF or volume 0 | Re-enable alarm (sec 5) | | Buttons unresponsive | Wet/sweaty fingers | Dry the touch area completely | | Wrong temperature | Internal heat from mirror | Subtract 2–3°C mentally | | Flashing "12:00" | Power loss | Reset time (sec 3) | | Mirror fogging up | LED mode is heating glass | Keep LED on continuously or improve ventilation |
- Clean mirror only with a soft, dry microfiber cloth – no liquids or sprays.
- Do not install in bathrooms with high humidity unless rated IP44 (check label).
- Keep away from direct heat sources (radiators, ovens).
UP/DOWN
The hour digit will flash. Use to set the correct hour. Press MODE . dt-6507 led mirror clock instructions
UP/DOWN
Adjust hours and minutes using , pressing ALARM to move between them. DT-6507 LED Mirror Clock: Setup & Operating Instructions