Harvey Hv3 Water Softener Installation Manual Verified 📢

Installing a Harvey HV3 water softener involves connecting the unit to the main water supply, typically under the kitchen sink or in a utility space, following WRAS-approved procedures and maintaining water pressure between 1.7 and 6.0 bar. The process requires a three-valve bypass, proper drainage with an air gap, a 5-liter initial water charge, and the use of block salt. For the full installation manual, visit Harveys water softener installation manual

Harvey water softener review, types and step by step installation. harvey hv3 water softener installation manual

Hoses

: Use WRAS-approved flexible hoses for the inlet and outlet. Remove the red protective caps from the softener before connecting. Drain & Overflow : Installing a Harvey HV3 water softener involves connecting

Once everything is connected, it’s time to start the system. Check for Leaks : Monitor all joints while

) generally follows a standardized procedure for modern homes Core Installation Requirements Operating Pressure : The system typically requires a pressure between 1.5 and 6 bar

Harvey HV3 Water Softener Specifications
Water Softener Installation Diagram
Troubleshooting Guide

Check for Leaks

: Monitor all joints while the unit is under pressure. 4. Maintenance BLOCK SALT SOFTENER INSTALLATION INSTRUCTIONS