How To Reset Epson L382 Waste Ink Pad Counterorange Light Blinking Link Updated May 2026

How to Reset the Waste Ink Pad Counter

To reset the waste ink pad counter on an Epson L382 when the orange (or red) lights are blinking, you must use a service utility to "initialize" the internal counter. This error indicates the printer has reached its programmed limit for ink waste and will stop printing until reset.

step-by-step guide

Below is a direct to reset the counter and resolve the orange blinking light. How to Reset the Waste Ink Pad Counter

Turn the printer off, then back on. The blinking lights should now be gone. small Phillips screwdriver

Main pad counter

Check the boxes for and Platen pad counter . Click Check to see the current usage percentage. Check the boxes again and click Initialize . Turn the printer off when prompted, then turn it back on. ⚠️ Important Hardware Note Resetting the software does not clean the physical pads. disposable container for ink.

If your downloaded program asks for a Serial Key:

• Gloves, paper towels, isopropyl alcohol, proper replacement pads or equivalent absorbent material, small Phillips screwdriver, disposable container for ink.