Instruction Manual For Motorola Radius Sp10 Hot! Online

The Motorola Radius SP10 is a portable, single-channel two-way radio designed for business and industrial use, operating on either VHF or UHF frequencies

• Plug the AC adapter into the drop-in charger and a wall outlet (110-240V AC).
• Insert the radio (with battery attached) into the charger facing forwards.
• LED Indicator: The charger light will turn Red (Charging). It will turn Green (Trickle charge) when full.
• Typical charge time for 600mAh: 8 hours.

• Do not submerge. The SP10 is "weather resistant" (rubber gaskets) but not waterproof. Rain is fine; a toilet is not.
• Do not drop on concrete. The die-cast frame will survive; your belt clip will not.
• Do not mix battery types: Never use alkaline and Ni-Cd cells in the same pack.

Overview

Selecting Channels

Short and Sweet:

These radios were built for brevity. Keep transmissions under 10 seconds to save battery and keep the airwaves open. Maintenance: The SP10’s Achilles' Heel Instruction Manual For Motorola Radius Sp10

10. Accessories

1. Power ON → Volume knob clockwise until click 2. Set channel → Toggle switch or knob 3. Listen → No action (squelched) 4. Talk → Hold PTT, speak clearly 5. Release PTT → Wait for reply 6. Monitor → Press side button to check weak signals 7. Off → Volume knob fully counterclockwise The Motorola Radius SP10 is a portable, single-channel

Warning:

Alkaline battery packs (if available) are not rechargeable . Plug the AC adapter into the drop-in charger