Ivoclar Programat P95 Manual _verified_ -
Core Specifications
Ivoclar Programat P95 is a legacy, high-performance vacuum ceramic furnace designed for dental laboratories to perform precise firing of various porcelain materials. Known for its reliability and microprocessor-controlled accuracy, it offers a range of programmable options to ensure consistent restoration results. Programs: Features 99 total firing programs. Dimensions: Approximately 41.5 x 43.3 x 29.5 cm. Weight: Roughly 16.5 kg.
The Ivoclar Programat P95 is a microprocessor-controlled furnace that offers precise temperature control, advanced features, and a user-friendly interface. It's designed for firing dental ceramics, such as zirconia, alumina, and lithium disilicate, as well as composites and metals. The furnace features a large, color touchscreen display, allowing users to easily navigate through various settings, programs, and options. Ivoclar Programat P95 Manual
To ensure longevity and safety, the official manual highlights several critical maintenance points: Core Specifications Ivoclar Programat P95 is a legacy,
Digital vs. Physical Manual: Pros and Cons
5.2 Running a Sintering Cycle
- Pressing ring positioning – offset from centre if pressing multiple rings
- Cooling rate control – critical for e.max strength
- Calibration routine (every 3–6 months) – uses ceramic calibration set
- Software menu structure (press+F1 for technician mode)
- Error codes – e.g., E-12 (vacuum leak), E-55 (heating rate issue)
Final note from the manual:
"Always run a test firing with a single crown before sintering a full arch prosthesis following any hardware change or power outage." Pressing ring positioning – offset from centre if
The Official Programat Documentation includes several critical warnings:
Cleaning:
Clean external surfaces only with a dry or slightly moist cloth; never use solvents. Keep the sealing ring and base rim clean to ensure a proper vacuum seal.