Jungheinrich Error Code 1901 – Easy

Error Code 1901

Jungheinrich is a safety-related event message that occurs when the drive (accelerator) pedal is activated during the forklift's startup sequence . Meaning and Cause

18;write_to_target_document7;default0;a1;0;a1;18;write_to_target_document1a;_GxjuaaCCDKeP8L0P1LrdkAo_20;a5;

1. Complete Loss of Traction: The mast hydraulics (lift/tilt) may still work, but the forklift will not drive.
2. Reduced Performance Mode (Limp Mode): The truck moves at a very slow crawl (often under 2 km/h) to allow safe return to a charging station or service area.
3. Intermittent Stalling: The error appears, clears itself after a key cycle, then reappears under load or after hitting a bump.
4. No Display on Drive Pedal Response: Pressing the accelerator does nothing, even though the parking brake is released.
5. Emergency Brake Engaged: Some models automatically engage the motor brake as a fail-safe.

This is the preferred method.

"There you are," Ray whispered.

limp mode

Without this accurate temperature data, the controller defaults into (reduced speed) or completely disables the drive motor to prevent thermal damage. Jungheinrich Error Code 1901

Elias let out a breath that sounded like a laugh. "You did it, Ray. You’re a wizard."

18;write_to_target_document7;default0;255;18;write_to_target_document1a;_GxjuaaCCDKeP8L0P1LrdkAo_20;a5; 0;7a;0;a5; Quick Troubleshooting Steps 0;16; Error Code 1901 Jungheinrich is a safety-related event

If you have performed all steps and code 1901 persists, contact a certified Jungheinrich technician – the traction controller may be faulty and requires dealer-level programming.