The total station does not use a standalone "driver" for the device itself; instead, connectivity depends on a USB-to-Serial data cable and the associated ProLific or FTDI cable drivers . 1. Cable Driver Installation Leica TC407 units connect to modern PCs via a 5-pin Lemo-to-USB cable. Identify the Chip : Most cables use either the ProLific PL2303 Go to product viewer dialog for this item. or FTDI FT232R Go to product viewer dialog for this item. chipset.
On the TC407, navigate to settings and match the PC's COM port parameters. Standard defaults are: Baud Rate: 19200 (or 115200 for newer models). Data Bits: 8. Parity: None. Stop Bit: 1. LEICA TC 407 driver
18;write_to_target_document7;default0;a1;0;a1;18;write_to_target_document1a;_YFvtaeLcO4f_7M8Pg-qvwAQ_20;a5; 0;f5;0;195; Leica TC407 Go to product viewer dialog for this item
Connectivity is managed through Leica-specific office software, which acts as the interface for the driver's COM port: Cable Driver Installation Leica TC407 units connect to