Mikrotik L2tp Server Setup Full [top] May 2026
Setting up an L2TP (Layer 2 Tunneling Protocol) server on MikroTik remains one of the most reliable ways to provide secure remote access to a local network. When combined with IPsec, it offers a robust balance of security and compatibility across Windows, macOS, Android, and iOS.
/ip firewall filter add chain=input protocol=udp port=500,4500 action=accept comment="IPsec" /ip firewall filter add chain=input protocol=ipsec-esp action=accept comment="IPsec ESP" /ip firewall filter add chain=input protocol=udp port=1701 action=accept comment="L2TP" mikrotik l2tp server setup full
Notes: setting bridge=bridge1 places VPN clients on the same Layer 2 domain if desired. If you prefer routed access, omit bridge and keep L3 routing. Setting up an L2TP (Layer 2 Tunneling Protocol)
IPsec Secret
: YourSharedKey (This is a pre-shared key you will enter on your client devices). 5. Configure Firewall Rules Go to IP > Services and click on
- Go to IP > Services and click on the + button to create a new service.
- Select L2TP as the service type.
- Set the L2TP Server to enabled.
- Set the L2TP Secret to a secure password (this will be used for authentication).
- Set the L2TP IP Range to a range of IP addresses that will be assigned to L2TP clients (e.g. 10.0.0.2-10.0.0.100).
- A Mikrotik router with RouterOS 6 or later
- A basic understanding of networking concepts and Mikrotik RouterOS
- A client device (e.g., laptop, smartphone) with L2TP/IPSec VPN client software