Narco Escort Ii Installation Manual 2021 Full -

NARCO II Installation Manual: Enhancing Your Lifestyle and Entertainment

Tools Required

: 3/16" Allen wrench (for securing the unit in the mounting tray), wire strippers, and soldering/crimping tools for connectors. 2. Wiring and Connector Pinouts (P301)

Before starting the installation process, make sure you have: narco escort ii installation manual full

The unit requires two separate coaxial inputs: one 50-ohm RG-58 A/U for the COM antenna and another for the NAV antenna. Audio Output: NARCO II Installation Manual: Enhancing Your Lifestyle and

  • If your aircraft has a modern encoder (e.g., ACK A-30), you must wire pins 4 through 12 directly. The manual includes a truth table for altitudes from -1000 to +35,000 feet. A mis-wired encoder is the #1 cause of "Mode C" failures on ramp checks. If your aircraft has a modern encoder (e

    Note: For 14V aircraft systems, pin 8 and pin 10 must be jumpered together. AeroElectric Antenna and Wiring Requirements Antenna Connections:

    Voltage

    : Standard 14V DC (Note: For 14V aircraft, you must jumper pins 8 and 10 on the P301 connector).