Primedic Defi B Service Manual Work

PRIMEDIC Defi-B

The is a portable, accumulator-driven asynchronous defibrillator designed for emergency medical use. Maintenance and service of this medical device must only be performed by personnel authorized and trained by METRAX . Technical Specifications Operating Mode : Asynchronous, external defibrillation.

  1. Battery Replacement: The Primedic Defi B uses batteries that need to be replaced periodically. The manual provides instructions on how to replace the batteries, including precautions to prevent electrical shock.
  2. Electrode Pad Inspection: The electrode pads need to be inspected regularly to ensure they are in good condition. The manual provides instructions on how to inspect and replace the electrode pads.
  3. Device Cleaning: The Primedic Defi B needs to be cleaned regularly to prevent bacterial growth and contamination. The manual provides instructions on how to clean the device, including precautions to prevent damage to the electrical components.
  4. Electrical Circuitry Inspection: The manual provides instructions on how to inspect the electrical circuitry of the Primedic Defi B, including checks for signs of wear and tear, corrosion, or damage.

Paddle Hygiene:

Remove residual conductive gel and impurities from the paddle surfaces using commercial disinfectants like Gigasept FF . primedic defi b service manual work

5. Durability & Environmental Resilience

This article is designed for biomedical engineers, clinical technicians, and emergency medical services (EMS) personnel who are responsible for maintaining this specific automated external defibrillator (AED). Battery Replacement : The Primedic Defi B uses

Visual Inspection:

Check for cracks or damage to the plastic casing. Low-impedance paddles test: 5 ohms

| Field | Value | |--------|-------| | Device serial number | | | Service date | | | Battery installed (SN & expiry) | | | Electrode pads expiry | | | Firmware version before/after | | | Energy accuracy check (measured @200J) | ___ J ±15% | | Charge time (200J) | ___ sec | | Self-test passed | ☐ Yes ☐ No | | Parts replaced | | | Next service due | | | Technician signature | |