Stakis Technik 20181 — Install Work

Stakis Technik 2018.1: Complete Installation and Workshop Guide

Key specifications (common to most 20181 variants):

Conclusion: Mastering the 20181 Install Work

2. Pre-Installation Preparation

Multi-Brand Coverage

: Access technical data for a wide variety of vehicle makes and models.

1. Power off completely – Lockout/tagout the control panel.
2. Strip wires 8mm – Do not expose excess copper.
3. Use ferrules – For stranded wire, crimp insulated ferrules. Bare stranded wire under screw terminals causes high resistance and heat.
4. Connect protective earth (PE) – If the 20181 has a PE terminal (often marked with the earth symbol), connect it to the panel ground busbar. If no terminal, ensure the DIN rail is grounded.
5. Wire inputs first (sensors, buttons).
6. Wire outputs second (contactors, lights, valves).
7. Wire power supply (A1, A2) last – This prevents accidental energization while handling other terminals.

• Some packages include a PC-side app (StakisControlCenter_v20181.exe).
• Install as administrator.
• Do not connect the device to internet – these tools often "phone home".

Labor Estimates

: Contains "Repair Times" modules to help workshops calculate labor costs efficiently.