Tld Acu-302-h-cup Manual ((hot)) May 2026
TLD ACU-302-H-CUP
This post provides an overview of the manual and operational information , a 24-ton diesel-electric air conditioning and heating unit designed for narrow-body and regional aircraft. TLD ACU-302-H-CUP Overview & Specifications
12. Contact & Support
TLD ACU-302-H-CUP manual (often grouped under the ACU-302 Series tld acu-302-h-cup manual
- Soft reset (keep IP/net settings): Press recessed button (left of Ethernet port) for 10 seconds.
- Hard reset (all settings default): Power off → Press and hold reset button → Power on (hold 15 seconds) → release.
- L / Line (Live) — mains input
- N / Neutral — mains neutral
- G — indoor fan motor (or fan relay)
- Y — compressor contactor/relay
- O/B — reversing valve (heat pump)
- R — 24 V power (if using standard thermostat)
- C — 24 V common (thermostat common)
- S1 / S2 — temperature sensor inputs
- FS — float switch (safety)
- PS — pressure switch input
Note: Verify terminal labels on your unit; wire colors vary.
- Position tug in front of nose gear (alignment arrows on windshield).
- Engage parking brake.
- Activate "Cup Open" – hydraulics expand the cup halves.
- Slowly drive forward until the nose wheel touches the rear cup sensor.
- Press "Cup Close" – The cup grips the tire at 1,200 psi (manual specifies exact pressure).
- Lift – The hydraulic lift cylinder raises the nose wheel 4 inches off the tarmac.
- Perform a tug test – Drive forward 3 feet, brake, check for cup slippage.
The unit is designed for ease of use with simple operating controls and low-maintenance requirements. TLD ACU-302-H-CUP This post provides an overview of
TLD does not publicly host manuals due to proprietary safety information. To obtain the legitimate manual: Soft reset (keep IP/net settings): Press recessed button