Usbstor Diskgeneric-usb-flash-disk--7.76 -

This string follows a standard naming convention used by the USBSTOR.sys driver:

• Files successfully extracted: [count] total bytes: [size]
• Files partially recovered or corrupted: list
• Evidence preservation steps taken

Filesystem types and sizes

Unallocated space: [size]

1. Backup data immediately (if possible).
2. Use DiskPart (Admin command prompt: diskpart → list disk → select disk X → clean → create partition primary → format fs=ntfs quick).
3. Note: A clean via DiskPart often resets the logical unit to a standard revision, making Windows report "Rev: 1.0" instead of the erroneous "7.76."

• Meaning: The manufacturer identifier.
• Role: "Generic" is a fallback string. It means the USB flash drive does not have a specific vendor ID (VID) registered with the USB-IF (or the VID is not recognized by Windows). Instead of showing "SanDisk," "Samsung," or "Kingston," Windows classes it as a generic mass storage device.
• Implication: Many budget or off-brand USB drives fall into this category. It is also common for recovered drives where the original firmware has been corrupted.