V2000-c User Manual _top_

Power Supply:

The V2000-C is a standalone RFID access control keypad typically used for securing single doors, gates, or offices. It supports multiple entry methods, including RFID cards (125KHz), 4-to-8 digit PIN codes, or a combination of both. Technical Specifications 12VDC ± 10%.

• In a car: Plug into cigarette lighter port. Unit auto-powers on when car starts.
• At home: Use a USB wall charger (5V/1.5A–2A).

Testing:

Always test the keypad with a registered card and the exit button before final assembly. Troubleshooting & Resets RFID Programming Guide v2000-c user manual

2.2 Moisture

While the V2000-C chassis is water-resistant, do not submerge the unit in depths greater than one meter. Prolonged exposure to salt water accelerates chassis rusting and may trigger the unit’s "Preservation Protocol," causing it to seek high ground, potentially climbing furniture or the user. Power Supply: The V2000-C is a standalone RFID

is a reliable workhorse for basic access control. By following these mounting and programming steps, you can create a safer environment in just an afternoon. For the full technical document and specific wiring diagrams, you can download the official manual from Obohands wiring diagram breakdown for a fail-safe vs. fail-secure lock setup? In a car : Plug into cigarette lighter port

Time Zones:

Create schedules for when doors should remain locked or unlocked.

| Issue | Possible solution | |---------------------------|-------------------------------------------| | Won’t power on | Charge for 30 min, try again. | | Sensor not detected | Check BNC connection; restart device. | | Recording fails | Free internal space – delete old logs. | | Touchscreen unresponsive | Press power button once to sleep/wake. |

part of the setup

Let me know which you are currently working on! RFID Programming Guide