Xh-m608 Manual Link

XH-M608

The is a versatile DC 6-40V battery charge and discharge controller module designed to protect various batteries (like lithium and polymer) from over-voltage and under-voltage conditions. It features an integrated voltmeter for real-time monitoring and a relay output to control external charging or discharging circuits. Key Specifications Input Voltage: DC 6.0V to 40V. Voltage Accuracy: Display and control accuracy of 0.1V0.1 cap V

| Parameter | Typical Value | |--------------------|------------------------------------| | Power supply | DC 12V or 24V (check variant) | | Temperature range | -50°C to +120°C (with NTC thermistor) | | Control accuracy | ±0.1°C or ±0.5°C | | Output relay | 10A / 250V AC (resistive load) | | Sensor type | NTC 10K (B=3435 or 3950) | | Display | 3-digit 7-segment LED (red) | | Dimensions | ~ 79 × 43 × 25 mm | Xh-m608 Manual

1. Introduction & Product Context

| Code | Meaning | Typical Range | |------|------------------------|------------------------| | P0 | Set temperature (SP) | -50 to +120°C | | P1 | Hysteresis (differential) | 0.1–15°C | | P2 | Control mode (heating/cooling) | H (heat) / C (cool) | | P3 | Calibration offset | -10 to +10°C | | P4 | Delay start (compressor protection) | 0–10 min | | P5 | High temperature alarm limit | up to 120°C | | P6 | Low temperature alarm limit | down to -50°C | XH-M608 The is a versatile DC 6-40V battery

1. AliExpress / Banggood Purchase History: The seller usually uploads a "Product Document" link. Check your orders.
2. GitHub Repositories: Open-source welder projects often archive the manual. Search GitHub for XH-M608 specs.
3. YouTube Community Posts: Tech reviewers like "GreatScott!" or "DIY Perks" often provide a cleaned-up manual link in their video descriptions.