Xprinter Xp-420b Wifi Setup -

To set up the Xprinter XP-420B via WiFi, you must first configure its wireless network settings using a USB connection and a specific Diagnostic Tool , then add it as a network printer on your computer. 1. Initial Wireless Configuration

Install Driver:

Run the printer driver installer. When prompted for the port, select Network/Ethernet and enter the IP address you just assigned. Option 2: Wi-Fi Direct Setup (Point-to-Point) xprinter xp-420b wifi setup

1. Power off the printer.
2. Plug the WiFi USB dongle into the USB port on the back of the XP-420B.
3. Power the printer back on. The LED on the dongle should blink slowly.

Step 4: Configure the Network

Switch the Printer On

Ideal for quick label printing straight from your smartphone without needing a router. : Ensure the printer is in Wi-Fi mode. To set up the Xprinter XP-420B via WiFi,

Option A: The Windows Bridge (Recommended)

Use a Windows PC to configure the WiFi dongle using the steps in Part 2. Once configured, the printer remembers the network. Move the printer near your Mac. Power off the printer