Xprinter Xp-q90ec Driver Extra Quality Download -

To get your Xprinter XP-Q90EC Go to product viewer dialog for this item.

are also widely used for professional label and barcode design. Installation Steps (Windows) xprinter xp-q90ec driver download

Select OS

: Choose your version of Windows (e.g., Windows 10 or 11). To get your Xprinter XP-Q90EC Go to product

This method is safe but may not provide the full configuration utility (like the Label Designer tool). Locate the downloaded file (usually named XP-80C_Q90_Driver

58mm Series

Choose the (or specifically the Cut Series if listed) to enable the automatic paper cutter. Select your operating system (e.g., Windows 10/11).

1. Locate the downloaded file (usually named XP-80C_Q90_Driver.zip or similar).
2. Extract the zip file to a local folder.
3. Locate the Setup.exe (Windows) file within the extracted folder.
4. Right-click and select "Run as Administrator" to ensure proper file permissions.

1. DIP Switches: Open the small cover on the bottom of the printer. Ensure Switch 1 is OFF (for Windows) or ON (for specific POS systems). For most users, set all DIP switches to OFF.
2. Emulation: The XP-Q90EC can emulate either ESC/POS or Star Line Mode. You need ESC/POS for standard drivers. Check your self-test page for "Emulation: ESC/POS."
3. USB Cable Quality: The XP-Q90EC is sensitive to cheap USB cables. If the driver installs but the printer disappears after sleep, replace the USB 2.0 cable.